1. Home
  2. Login
  3. Recent Orders
  4. Basket
  5. Checkout

Wecome To MultiMediaSystems.co.uk Consumer Electronics & Accessories Mail Order Sales UK, Ireland, Europe & World, Also Professional Installations & Support

LNBs Specialist

NEED Two Signals Down One Cable Run

STACKER DE-STACKER Gives You 2x Satellite Signals Down 1x Cable Run To Your Receiver


Ideal for SMATV Systems, FreeSat PVR Recorders, Sky Plus HD Etc.
* Send 2 Satellite Signals Down 1 Single Cable.
* No Need To Install Any Extra Cables To Your Satellite System.
* Works Indoors And Outsite
* Works Direct From LNB Connection or With Multiswitches

Need 2 Satellite Signals And Only Have 1 Single Cable Run From Your Dish To Your Receiver And Are Not Able or You Do Not Want To Install An Extra Cable Then You Need The Stacker Destacker, This Will Give You 2 Satellite Signals From Your Dish LNB or Multiswitch Down 1 Cable To Your Satellite Receiver.
You Can Then Use Sky Plus, Sky HD or Any Freesat HDR Twin Recorder That Needs 2 Signals From Your Exsiting Single Cable Run.

QUESTIONS:


1. Are You Looking To Have Sky Plus or Freesat And Only Have 1 Single Cable Run Installed.
2. Are You Unable To Install Or Cannot Run A Second Cable To Your Receiver.
3. Do You Have A Second Output On Your Dish Or From A Multiswitch But Only Have 1 Cable.
4. Is Your Cable Run From The Dish or Multiswitch Less Than 60 Metres or 195 Feet in total.
If Above is Yes, Then You Can Use Our Stacker De-stacker To Send 2 Signals Down A Single Cable Run Up To 65m or 211 ft And Split Them The Other End See Here:

To Order Your Stacker De-Stacker Go Here


How To Use The Stacker-Destacker In Your System At Home.


Check The Following First:
1. Find your Dish or Multiswitch that feeds your system, usually the dish will be located on your wall or where the dish cables enter the building the take a note of how long your cables are from the dish to the receiver end.
2. Identify your existing cable that connects from the Dish to your box.
3. Make sure that the existing cable that comes from your dish or Multiswitch to your receiver has no other equipment installed in the line.
4. Check for any spare satellite signal outputs from the Dish LNB or Multiswitch you will need 2 signal feeds from the LNB. (If Only a single signal is available you will need to change your LNB to a Quad or Octo Etc)
5. Make Sure the Cable Run from your LNB or Multiswitch or Dish is Less Than 65 Metres or 211 Feet in Length.

If the above is OK and there is a spare port then all you need is our stacker de-stacker unit see here: To Order Your Stacker De-Stacker Go Here

Do You Live In A Flat or Apartment & Use A Shared Dish Etc.


Then You Need To Check The Following First:
1. Find your Headend Equipment or Multiswitch that feeds your flat, usually this will be located in a loft space or maybe a cabinet or cupboard space somewhere in the building where the dish cables enter the building, if you cannot find the headend equipment then contact your management company or landlord they should know.
2. Identify your existing cable that connects from the Multiswitch to your box.
3. Make sure that the existing cable that comes from your dish or Multiswitch to your receiver has no other equipment installed in the line.
4. Check for any spare satellite signal outputs from the Dish or Multiswitch. (There is normally some spares available)
5. Make Sure the Cable Run from your Headend Multiswitch or Dish is Less Than 65 Metres or 211 Feet in Length.

If the above is OK and there is a spare port then all you need is our stacker de-stacker unit see here: To Order Your Stacker De-Stacker Go Here

IF YOU ARE NOT SURE IF YOU CAN USE A STACKER DE-STACKER OR YOU NEED A SITE SURVEY SEE BELOW OR CALL US ON 01634 296929 FOR MORE ADVISE:


If you live in Kent, Sussex, Essex or SE London Area And Would Like A Site Survey* For A Second Signal From Your Dish, Multiswitch For Sky Plus Or Freesat Plus Etc, Just Contact Us On 01634 296929.

* Please Note Site Survey Will Be Chargeable.
LNB Single 0.2dB With Built in DiSEqC Switch for Second LNB

LNB Single 0.2dB With Built in DiSEqC Switch for Second LNB


Maximum V11 Single LNB + DiSEqC switch all in one LNB


Looks like a Twin LNB - But it's Actually An LNB With A Built in DiSEqC 1.0 Switch - So Simply Connect LNB Output To A Second LNB And You Have Access To 2 Satellites Using DiSEqC 1.0 - A and B On Your Two Satellite Settings On Your Satellite Receiver.
This LNB Has A Built-In Diseqc Switch For Connection To A Second LNB


Note: Picture Shows Black LNB But The New LNB's Are in White Now.
LNB Quad 4 Outputs With Terrestrial UHF Input IDLP-40QDTER 0.2dB

High performance, universal Quad LNB with Terrestrial UHF Input


standard 40mm collar
This LNB Has 4 Satellite Outputs Plus There is a Terrestrial Aerial Input This Means you can connect your aerial to this LNB and both signals travel down the single cable to the wall outlet Diplex plate.

NEW 5 YEAR WARRANTEE

MTI SUPREAMELINE 0.2dB Quattro LNB 4x Outputs H/V H/L Commercial

MTI SUPREAMELINE 0.2dB Quattro LNB 4x Outputs H/V H/L Commercial


For Use With Multiswitches-IRS Systems And Multi Point Commercial Installations
Suitable for All Receivers Including Sky And Sky Plus HD, Freesat HD, Freesat HDR & European Receivers.
Fits All Standard Dishes Any Size with 40mm Coller LNB brackets.

NOTE: Not Suitable For Normal Domestic Receivers ONLY Commercial Setups.
ALSO NOTE: WILL NOT FIT NORMAL 43cm SKY DISHES Zone 1 or Zone 2.
LNB Quattro 4 x Outputs H/V H/L For Commercial Use

LNB Quattro 4 x Outputs H/V H/L For Commercial Use


Price 42.54 (Excluding VAT at 20%)

LNB Sky Quattro 4 x Outputs 4x Ports Hor & Ver / High & Low Band


Designed for Multi Point Commercial Installations And Satellite Multi-Switches

Suitable for Sky And Sky Plus.
WILL NOT FIT NORMAL 43cm SKY DISH You will need a Standard 60cm or more dish with 40mm LNB bracket.
LNB Inverto Pro Octo Switch 8 Outputs 40mm 0.2dB

LNB Inverto Pro Octo Switch 8 Outputs 40mm 0.2dB


Price 34.99 (Excluding VAT at 20%)

LNB Inverto Pro Octo Switch 8 Outputs 40mm 0.2dB


5 Year Warranty


With its 8 Outputs this LNB allows for the connection of up to 8 Set-top boxes or 4 Dual-tuner PVRs without the need of an external Multi-Switch. Specifically designed for the European DTH markets, this LNB provides optimized reception capabilities. It is ready for High Definition transmissions and provides excellent Noise Figure performance. Manufactured to the highest industry quality standards and designed to meet strict specifications, this LNB is an ideal solution for the satellite broadcast reception across Europe.

Main Features:

• Low phase Noise HDTV-DVBS2 compliant
• Low Noise figure of 0.2 dB
• Low Power consumption 210 (max) mA
• Very high Cross-Pole performance
• Very high Frequency stability
LNB Octo 8 Outputs MTI AK58-XT2 0.3dB 40mm

LNB Octo 8 Outputs MTI AK58-XT2 0.3dB 40mm


Price 39.99 (Excluding VAT at 20%)
Item OUT OF STOCK or ON ORDER
Click Here To Contact Us For Availability

LNB Octo 8 Outputs MTI AK58-XT2 0.3dB 40mm


The most cutting-edge RF knowledge forms this Gray Line 0.3dB Octo LNB. It comes with outstanding performance and can be used to operate up to 8 digital receivers. (NB Please note that this LNB is not matched to the SKY elliptical dishes)
Sky LNB Legacy Adaptor MK4 to MK3

Sky LNB Legacy Adaptor MK4 to MK3


Price 2.99 (Excluding VAT at 20%)

Sky LNB Legacy Adaptor MK4 to MK3


Allows MK4 LNB's to fit MK3 zone dishes



SKY LNB 'LEGACY' Adaptor MK4>MK3

This adaptor enables a MK4 LNB to fit a MK3 Zone Dish.
LNB Sky Dish Adaptor (25mm x 13mm to 30mm x 20mm)

LNB Sky Dish Adaptor (25mm x 13mm to 30mm x 20mm)


Price 1.49 (Excluding VAT at 20%)

LNB Sky Dish Adaptor (25mm x 13mm to 30mm x 20mm)


Sky LNB Adaptor to enable you to install a Sky LNB that is 25mm x 13mm to a Sky Dish LNB Arm That is 30mm x 20mm in size.

TRIAX 40mm LNB Holder Only for Sky Elliptical Dish

TRIAX 40mm LNB Holder Only for Sky Elliptical Dish


Price 3.99 (Excluding VAT at 20%)

TRIAX 40mm LNB Holder Only for Sky Elliptical Dish


Sky LNB Holder Only to enable you to install any 40mm LNB to a Sky Dish Zone 1 or 2.
(Allows use of any 40mm LNB Single Twin Quad or 8 Way LNB on any Zone 1 or 2 Sky Dish)

TRIAX 40mm LNB Holder Kit With Adaptor for Elliptical Dish

TRIAX 40mm LNB Holder Kit With Adaptor for Elliptical Dish


Price 4.99 (Excluding VAT at 20%)
Item OUT OF STOCK or ON ORDER
Click Here To Contact Us For Availability

TRIAX 40mm LNB Holder Kit With Adaptor for Elliptical Dish


Sky LNB Holder Only to enable you to install any 40mm LNB to a Sky Dish Zone 1 or 2.
(Allows use of any 40mm LNB Single Twin Quad or 8 Way LNB on any Zone 1 or 2 Sky Dish)

Includes:
LNB 40mm Holder
Plus Dish Adaptor

Customers who bought this product also purchased the following;:

43cm Sky Freesat Dish Pack Zone 1 MK4 Plus Wall Mount
TRIAX TD Flexi-Block Twin LNB Holder 3- 10 Spacing

TRIAX TD Flexi-Block Twin LNB Holder 3°- 10° Spacing


Price 14.99 (Excluding VAT at 20%)

TRIAX TD Flexi-Block Twin LNB Holder 3°- 10° Spacing



A flexible dual 3 - 10 Degree spacing LNB holder for use with the TRIAX TD range of dishes
TRIAX Multiblock 4x LNB Holder for TD Range 20 Deg Span

TRIAX Multiblock 4x LNB Holder for TD Range 20 Deg Span


Price 19.99 (Excluding VAT at 20%)

TRIAX Multiblock 4x LNB Holder for TD Range 20 Deg Span


Holds up to 4 LNBS (NOT SUPPLIED)



TRIAX Multiblock LNB Holder for TD Range of Dishes
Also Compatible With Inverto 80cm Dish

Four LNB holder, upto 20 degree span, includes bar and feed clamps only.
For use with the TRIAX TD range of dishes and Inverto 80cm Dish Only
Global Stacker De-Stacker STANDARD 30m

Global Stacker De-Stacker STANDARD 30m


Price 79.99 (Excluding VAT at 20%)
Add A Stacker Cable Kit If Needed (Needed For Connections)

Standard 30m Version For Cable Runs From 1m to 30m Long


Two Signals Down One Cable, Ideal For Sky Plus HD & Freesat Plus HD, For Cable Runs up to 30 metres (30m Version)
The Global Invacom Stacker Destacker is designed to allow 2 LNB feeds to connect to 2 tuners, or set-top boxes, via one cable. Ideal for Freesat PVR Receivers, Sky+, Sky HD, Sky Multiroom or Any European Receiver Systems.
TWO VERSIONS AVAILABLE
* "Standard" version, 1-30mtrs*, Suitable for Home Domestic & Short Cable Installations.
* "DiSEqC Enabled Version", 35-65Mtrs*, Suitable for Multi-Point Commercial and Large or Long Cable Installations.
* Recommended Cable CT100, or the equivalent of.

The Global Stacker De-Stacker STANDARD is Ideal for FreeSat Satellite Systems PVR Recorders, Sky Plus HD Etc.
* Send 2 Satellite System Signals Down 1 Single Satellite Cable.
* No Need To Install Any Extra Cables To Your Satellite System.
* Works Indoors And Outsite
* Works Direct From LNB Connection or With Multiswitches
* 2 LNB inputs into one cable
* Both LNB inputs independently selectable
* Standard and Long cable versions available


Manufactures Web site

Stacker-De-Stacker Data Sheet PDF File Click Here

Global Stacker De-Stacker DiSEqC Enabled Version 35m

Global Stacker De-Stacker DiSEqC Enabled Version 35m


Price 84.99 (Excluding VAT at 20%)
Add A Stacker Cable Kit If Needed (Needed For Connections)
If Your Single Cable Run is More Than 35m Then Add Stacker SDS Amplifier Here To Extend The Use To Cable Runs More Than 35m and up to 65m

NEW MODEL WITH DiSEqC Enabled 1 Cable Solution (Operates up to 35m or 65m With GLOBAL Stacker SDS Line Amplifier)


Two Signals Down One Cable, Ideal For Sky Plus HD & Freesat Plus HD, For Cable Runs up to 35 metres (65m If Amp is Added)
The Global Invacom Stacker destacker is designed to allow 2 LNB feeds to connect to 2 tuners, or set-top boxes, via onecable. Ideal for Freesat PVR Receivers, Sky+, Sky HD, Sky Multiroom or Any European Receiver Systems.

* "DiSEqc Enabled Version", 1-35mtrs*, Suitable for Commercial Cable Installations.
* Suitable for Multi-Point Commercial For use with 5 or 9 Input Multiswitches Installations.
* Recommended Cable CT100, or the equivalent of.

The Global Stacker De-Stacker DiSEqC Enabled Version is Ideal for SMATV Systems And Commercial Satellite Systems, Freesat Satellite Systems FreeSat PVR Recorders, Sky Plus HD Etc.
* Send 2 Satellite System Signals Down 1 Single Satellite Cable.
* No Need To Install Any Extra Cables To Your Satellite System.
* Works Indoors And Outsite
* Ideal For 5 or 9 Input Multiswitches


DiSEqC 1.2 Rated

Manufactures Web site

Stacker-De-Stacker Latest Tests From Tele-Satellite PDF

GLOBAL Stacker SDS Line Amplifier Extends DiSEqC Version Up To 65m

Special Line Amplifier For Stacker De-Stacker Use Only Increses Cablke Size From 35m To 65m


*NEW* GLOBAL DiSEqC 'S.D.S.' Line Amplifier


Extends the use of the Stacker 35m DiSEqC Enabled Version up to 65m
For use with STACKER-D35 - Global Stacker De-Stacker DiSEqC Enabled Version (up to 35m)

Download Global Data Sheet PDF File Here

Recently Viewed











1069345836