1. Home
  2. Login
  3. Recent Orders
  4. Basket
  5. Checkout

Wecome To MultiMediaSystems.co.uk Consumer Electronics & Accessories Mail Order Sales UK, Ireland, Europe & World, Also Professional Installations & Support

LNBs 2 Outputs Twin

NEED Two Signals Down One Cable Run

STACKER DE-STACKER Gives You 2x Satellite Signals Down 1x Cable Run To Your Receiver


Ideal for SMATV Systems, FreeSat PVR Recorders, Sky Plus HD Etc.
* Send 2 Satellite Signals Down 1 Single Cable.
* No Need To Install Any Extra Cables To Your Satellite System.
* Works Indoors And Outsite
* Works Direct From LNB Connection or With Multiswitches

Need 2 Satellite Signals And Only Have 1 Single Cable Run From Your Dish To Your Receiver And Are Not Able or You Do Not Want To Install An Extra Cable Then You Need The Stacker Destacker, This Will Give You 2 Satellite Signals From Your Dish LNB or Multiswitch Down 1 Cable To Your Satellite Receiver.
You Can Then Use Sky Plus, Sky HD or Any Freesat HDR Twin Recorder That Needs 2 Signals From Your Exsiting Single Cable Run.

QUESTIONS:


1. Are You Looking To Have Sky Plus or Freesat And Only Have 1 Single Cable Run Installed.
2. Are You Unable To Install Or Cannot Run A Second Cable To Your Receiver.
3. Do You Have A Second Output On Your Dish Or From A Multiswitch But Only Have 1 Cable.
4. Is Your Cable Run From The Dish or Multiswitch Less Than 60 Metres or 195 Feet in total.
If Above is Yes, Then You Can Use Our Stacker De-stacker To Send 2 Signals Down A Single Cable Run Up To 65m or 211 ft And Split Them The Other End See Here:

To Order Your Stacker De-Stacker Go Here


How To Use The Stacker-Destacker In Your System At Home.


Check The Following First:
1. Find your Dish or Multiswitch that feeds your system, usually the dish will be located on your wall or where the dish cables enter the building the take a note of how long your cables are from the dish to the receiver end.
2. Identify your existing cable that connects from the Dish to your box.
3. Make sure that the existing cable that comes from your dish or Multiswitch to your receiver has no other equipment installed in the line.
4. Check for any spare satellite signal outputs from the Dish LNB or Multiswitch you will need 2 signal feeds from the LNB. (If Only a single signal is available you will need to change your LNB to a Quad or Octo Etc)
5. Make Sure the Cable Run from your LNB or Multiswitch or Dish is Less Than 65 Metres or 211 Feet in Length.

If the above is OK and there is a spare port then all you need is our stacker de-stacker unit see here: To Order Your Stacker De-Stacker Go Here

Do You Live In A Flat or Apartment & Use A Shared Dish Etc.


Then You Need To Check The Following First:
1. Find your Headend Equipment or Multiswitch that feeds your flat, usually this will be located in a loft space or maybe a cabinet or cupboard space somewhere in the building where the dish cables enter the building, if you cannot find the headend equipment then contact your management company or landlord they should know.
2. Identify your existing cable that connects from the Multiswitch to your box.
3. Make sure that the existing cable that comes from your dish or Multiswitch to your receiver has no other equipment installed in the line.
4. Check for any spare satellite signal outputs from the Dish or Multiswitch. (There is normally some spares available)
5. Make Sure the Cable Run from your Headend Multiswitch or Dish is Less Than 65 Metres or 211 Feet in Length.

If the above is OK and there is a spare port then all you need is our stacker de-stacker unit see here: To Order Your Stacker De-Stacker Go Here

IF YOU ARE NOT SURE IF YOU CAN USE A STACKER DE-STACKER OR YOU NEED A SITE SURVEY SEE BELOW OR CALL US ON 01634 296929 FOR MORE ADVISE:


If you live in Kent, Sussex, Essex or SE London Area And Would Like A Site Survey* For A Second Signal From Your Dish, Multiswitch For Sky Plus Or Freesat Plus Etc, Just Contact Us On 01634 296929.

* Please Note Site Survey Will Be Chargeable.
LNB Twin 2 Outputs 0.3dB Digiquest Universal

LNB Twin 2 Outputs 0.3dB Digiquest Universal


Price 16.66 (Excluding VAT at 20%)
Item OUT OF STOCK or ON ORDER
Click Here To Contact Us For Availability

LNB TWIN 0.3dB Digiquest



Great Low Price High Quality Twin LNB
LNB MTI Twin Output

LNB MTI Twin Output


Price 41.70 (Excluding VAT at 20%)
Item OUT OF STOCK or ON ORDER
Click Here To Contact Us For Availability

Standard 40mm Twin Output LNB rated at 0.6db



Special Price
Inverto 2dB Monoblock LNB 6 deg Astra 19 And Hotbird 13

Inverto 2dB Monoblock LNB 6 deg Astra 19 And Hotbird 13


Price 24.99 (Excluding VAT at 20%)

Inverto High Performance 0.2 dB Monoblock LNB 06 Deg with built in DiseqC


Monoblock LNB 0.2dB 5 Year Warranty
IDLB-SINM40-MNOO6-8PP

This monoblock LNB was designed for dual satellite reception. It can be used for the broadcast reception of any two satellites, spaced with 6° on an 80cm dish antenna, and its distribution to a single tuner Set-top box. It is optimized for High Definition transmissions, provides excellent Noise Figure performance and manufactured to the highest industry quality standards.

Main Features:
• Low phase Noise HDTV-DVBS2 compliant
• Low Noise figure of 0.2 dB
• Low Power consumption 120 (typ), 150 (max) mA
• Very high Cross-Pole performance
• Very high Frequency stability

allows you to receive Astra 1 ( 19.2 Deg East ) and Hotbird ( 13 Deg East) from one fixed dish and only requires one cable to the LNB. Suitable for DiseqC digital receivers.
Excellent performance...
Inverto 0.2dB Monoblock LNB 3 deg Astra 19 And Eutelsat 16

Inverto High Performance 0.2 dB Monoblock LNB 03 Deg with built in DiseqC


This monoblock LNB was designed for dual satellite reception. It can be used for the broadcast reception of any two satellites, spaced with 3° on an 80cm dish antenna, and its distribution to a single tuner Set-top box. It is optimized for High Definition transmissions, provides excellent Noise Figure performance and manufactured to the highest industry quality standards.

Monoblock Mounting Bracket = 60 mm (Requires 60mm LNB Holder - PH200)

Main Features:

• Low phase Noise HDTV-DVBS2 compliant
• Low Noise figure of 0.2 dB
• Low Power consumption 120 (max) mA
• Very high Cross-Pole performance
• Very high Frequency stability

Allows you to receive Astra 1 ( 19.2 Deg East ) and Eutelsat ( 16 Deg East) from one fixed dish and only requires one cable to the LNB. Suitable for DiseqC digital receivers.
Excellent performance...
Humax Universal Monoblock 0.4dB LNB

Humax Universal Monoblock 0.4dB LNB


Price 25.22 (Excluding VAT at 20%)
Item OUT OF STOCK or ON ORDER
Click Here To Contact Us For Availability

LNB Mono Block 2 x LNB Humax for Astra 1 and Hotbird


Features:

Frequency Range: 10.7 - 12.75 Ghz
LO Frequency: 2 x 9.75 - 10.6 Ghz
Noise Figure: 0.4dB typical
Gain: 50 - 60dB
Interface: 40mm with adapter
Satellite In Line Amp 16-20dB Sloped 47-2300MHz

Satellite In Line Amp 16-20dB Sloped 47-2300MHz


Price 4.99 (Excluding VAT at 20%)

Satellite In Line Amp 16-20dB Sloped 47-2300MHz


For Use With Long Satellite Cable Runs Where You Have Weak Signals At The Receiver End.

Sloped Line Amplifier

Features:
- Input/Output F-(f) connector, 75 Ohm
- Designed for in-line boosting satellite IF
- Power supply from the receiver via coaxial cable
- Product with slope gain
- Low intermodulation distortion
- Zinc die cast housing, nickel plated
- 500 mA power pass for LNB operation
- Screening factor: class A.
- 16-20dB Sloped
- 47 to 2300MHz
LNB Sky Dish Adaptor (25mm x 13mm to 30mm x 20mm)

LNB Sky Dish Adaptor (25mm x 13mm to 30mm x 20mm)


Price 1.49 (Excluding VAT at 20%)

LNB Sky Dish Adaptor (25mm x 13mm to 30mm x 20mm)


Sky LNB Adaptor to enable you to install a Sky LNB that is 25mm x 13mm to a Sky Dish LNB Arm That is 30mm x 20mm in size.

TRIAX 40mm LNB Holder Only for Sky Elliptical Dish

TRIAX 40mm LNB Holder Only for Sky Elliptical Dish


Price 3.99 (Excluding VAT at 20%)

TRIAX 40mm LNB Holder Only for Sky Elliptical Dish


Sky LNB Holder Only to enable you to install any 40mm LNB to a Sky Dish Zone 1 or 2.
(Allows use of any 40mm LNB Single Twin Quad or 8 Way LNB on any Zone 1 or 2 Sky Dish)

TRIAX 40mm LNB Holder Kit With Adaptor for Elliptical Dish

TRIAX 40mm LNB Holder Kit With Adaptor for Elliptical Dish


Price 4.99 (Excluding VAT at 20%)
Item OUT OF STOCK or ON ORDER
Click Here To Contact Us For Availability

TRIAX 40mm LNB Holder Kit With Adaptor for Elliptical Dish


Sky LNB Holder Only to enable you to install any 40mm LNB to a Sky Dish Zone 1 or 2.
(Allows use of any 40mm LNB Single Twin Quad or 8 Way LNB on any Zone 1 or 2 Sky Dish)

Includes:
LNB 40mm Holder
Plus Dish Adaptor

Customers who bought this product also purchased the following;:

43cm Sky Freesat Dish Pack Zone 1 MK4 Plus Wall Mount
Global Stacker De-Stacker STANDARD 30m

Global Stacker De-Stacker STANDARD 30m


Price 79.99 (Excluding VAT at 20%)
Add A Stacker Cable Kit If Needed (Needed For Connections)

Standard 30m Version For Cable Runs From 1m to 30m Long


Two Signals Down One Cable, Ideal For Sky Plus HD & Freesat Plus HD, For Cable Runs up to 30 metres (30m Version)
The Global Invacom Stacker Destacker is designed to allow 2 LNB feeds to connect to 2 tuners, or set-top boxes, via one cable. Ideal for Freesat PVR Receivers, Sky+, Sky HD, Sky Multiroom or Any European Receiver Systems.
TWO VERSIONS AVAILABLE
* "Standard" version, 1-30mtrs*, Suitable for Home Domestic & Short Cable Installations.
* "DiSEqC Enabled Version", 35-65Mtrs*, Suitable for Multi-Point Commercial and Large or Long Cable Installations.
* Recommended Cable CT100, or the equivalent of.

The Global Stacker De-Stacker STANDARD is Ideal for FreeSat Satellite Systems PVR Recorders, Sky Plus HD Etc.
* Send 2 Satellite System Signals Down 1 Single Satellite Cable.
* No Need To Install Any Extra Cables To Your Satellite System.
* Works Indoors And Outsite
* Works Direct From LNB Connection or With Multiswitches
* 2 LNB inputs into one cable
* Both LNB inputs independently selectable
* Standard and Long cable versions available


Manufactures Web site

Stacker-De-Stacker Data Sheet PDF File Click Here

Global Stacker De-Stacker DiSEqC Enabled Version 35m

Global Stacker De-Stacker DiSEqC Enabled Version 35m


Price 84.99 (Excluding VAT at 20%)
Add A Stacker Cable Kit If Needed (Needed For Connections)
If Your Single Cable Run is More Than 35m Then Add Stacker SDS Amplifier Here To Extend The Use To Cable Runs More Than 35m and up to 65m

NEW MODEL WITH DiSEqC Enabled 1 Cable Solution (Operates up to 35m or 65m With GLOBAL Stacker SDS Line Amplifier)


Two Signals Down One Cable, Ideal For Sky Plus HD & Freesat Plus HD, For Cable Runs up to 35 metres (65m If Amp is Added)
The Global Invacom Stacker destacker is designed to allow 2 LNB feeds to connect to 2 tuners, or set-top boxes, via onecable. Ideal for Freesat PVR Receivers, Sky+, Sky HD, Sky Multiroom or Any European Receiver Systems.

* "DiSEqc Enabled Version", 1-35mtrs*, Suitable for Commercial Cable Installations.
* Suitable for Multi-Point Commercial For use with 5 or 9 Input Multiswitches Installations.
* Recommended Cable CT100, or the equivalent of.

The Global Stacker De-Stacker DiSEqC Enabled Version is Ideal for SMATV Systems And Commercial Satellite Systems, Freesat Satellite Systems FreeSat PVR Recorders, Sky Plus HD Etc.
* Send 2 Satellite System Signals Down 1 Single Satellite Cable.
* No Need To Install Any Extra Cables To Your Satellite System.
* Works Indoors And Outsite
* Ideal For 5 or 9 Input Multiswitches


DiSEqC 1.2 Rated

Manufactures Web site

Stacker-De-Stacker Latest Tests From Tele-Satellite PDF

Recently Viewed











1069345836